|
Go to Main
Help Menu
Complete Help
coming soon.
Configuration Menu: Click to be brought to the
configuration menu of the Model 112.
Help: Click to
go to the main Model 112 Help menu (opens in a separate window).
Access
Status:
Select Disabled or Enabled. Factory default is Enabled. When
enabled the remote user can access SNMP objects with correct community
names. Model 112 can still generate traps if access status is disabled.
Note: In order to function, port 161 must be open through any firewalls
between the PC and the Model 112.
Read
Community Name:
Enter a read community name, up to 31 characters. Factory default is
public.
Read-Write
Community Name:
Enter a read-write community name, up to 31 characters. Factory default is
private.
Submit: Click
Submit to send the Access changes to the system.
Trap (Notification)
Status:
Select Disabled or Enabled. Factory default is Disabled.
Minimum Trap
Interval:
Select 1 min, 10 min, 30 min, 1 hr, 2 hr, 4 hr, 8 hr. Factory default is
1 min.
Trap
Community Name:
Enter a trap community name, up to 31 characters. Factory default is
public.
Receiver
Address:
Enter the receiver address, up to 31 characters. Factory default is
blank.
Version:
Select v1 or v2c. Factory default is v2c.
Submit: Click
Submit to send the Trap (Notification) changes to the system.
Trap Trigger
Threshold (dB):
Enter a number in dB between 0 and 160 for the threshold. Factory default is 94.
Measurement Type:
Select SPL Fast, SPL Slow, Leq 1 sec, Leq 10 sec, Leq 1 min, Leq 5 min, Leq 10 min,
Leq 15 min, Leq 30 min, Leq 1 hr, Leq 8 hr, Leq 24 hr, Leq Continuous, User Ln,
L1, L10, L50, L90, or Peak C. Factory default is SPL Fast.
Submit: Click
Submit to send the Trap Trigger changes to the system.
Test Trap: Click
Send to send a test trap. Note: Trap status must be enabled to
send a test trap.
Error Status: Shows
--- or current error. See Configuration Menu Help
for a description of all error messages.
Clear Error Message:
Click to clear error message.
Studio Technologies,
Inc.: Clicking this link will bring you to the SPLnet website home page.
|
