|
Go to Main
Help Menu
Complete Help
coming soon.
Configuration Menu: Click to be brought to the
configuration menu of the Model 112.
Help: Click to
go to the main Model 112 Help menu (opens in a separate window).
Microphone Input
Type:
Select CCP – TEDS
Sensitivity, CCP – Manual Sensitivity, or Audio Only – Manual
Sensitivity. Factory default is CCP – TEDS Sensitivity.
CCP Current:
Select Normal or High
Current. Factory default is Normal.
Gain:
Select –15 dB, 0 dB, +15 dB, +30 dB. The factory default is 0 dB.
Manual Sensitivity (mV/Pa):
Enter the manual sensitivity in mV/Pa. Acceptable values range from 1.0
to 99.9.
Factory default is 50.0.
Submit: Click
Submit to send the Microphone Input changes to the system.
Status: Possible
microphone input status messages:
Audio only
No Mic Connected
TEDS 0.9 Mic Connected
TEDS 1.0 Mic Connected
Non-TEDS Mic Connected
No valid TEDS Data Read
IEC 61672 Compliance:
Shows the class of the connected microphone or --- if not available.
Active Sensitivity (mV/Pa):
Shows the active sensitivity in mV/Pa or --- if not available.
Maximum SPL (dB):
Shows the maximum SPL in dB or --- if not available.
TEDS Data
Manufacturer:
Shows the manufacturer of the measurement microphone or --- if not
available.
For a
complete list of TEDS-compliant manufacturers see
http://standards.ieee.org/regauth/1451/manufacturerID/Public_Listing.html.
Model Number:
Shows the model number of the measurement microphone or --- if not
available.
Serial Number:
Shows the serial number of the measurement microphone or --- if not
available.
Sensitivity (mV/Pa):
Shows the sensitivity of the measurement microphone in mV/Pa or --- if
not available.
Calibration Date:
Shows the date of factory calibration of the measurement microphone or
--- if not available.
Calibration
Period (Days):
Shows the calibration period in days of the measurement microphone or
--- if not available.
Error Status: Shows
--- or current error. See Configuration Menu Help
for a description of all error messages.
Clear Error Message:
Click to clear error message.
Studio Technologies,
Inc.: Clicking this link will bring you to the SPLnet website home page.
|
