|
Go to Main
Help Menu
Complete Help
coming soon.
Configuration Menu: Click to be brought to the
configuration menu of the Model 112.
Help: Click to
go to the main Model 112 Help menu (opens in a separate window).
Status:
Select Disabled or Enabled. Factory default is Disabled.
Submit: Click Submit to send the Status changes to the system.
SMTP Server Configuration
Address:
Enter the SMTP server address, up to 31 characters. Factory default is
blank.
Port Number:
Enter the port number, up to 4 characters. Common port numbers are 25
and 587. Factory default is 25.
Use Authentication:
Select No or Yes. Factory default is No.
Authentication User Name:
Enter the authentication user name, up to 31 characters. Factory default is
blank.
New
Authentication Password:
Enter an authentication password between 1 and 31 characters. The new
password cannot be blank. Factory default
is blank.
Submit: Click Submit to send the Server Configuration changes to the system.
Message
From Name:
Enter the from name, up to 31 characters. Factory default is SPLnet.
From
Address:
Enter the from address, up to 31 characters. Factory default is SPLnet@example.com.
Recipient
Address 1:
Enter the first recipient address, up to 31 characters. Factory default
is blank. For more information on sending SMS text messages refer to
"Sending SMS Text Messages" below.
Recipient
Address 2:
Enter the second recipient address (if
applicable), up to 31 characters. Factory
default is blank. For more information on
sending SMS text messages refer to "Sending
SMS Text Messages" below.
Message
Subject:
Enter the subject of the message, up to 31 characters. Factory default is
SPL Report.
Message
Body:
Enter the body copy of the message, up to 63 characters. The
trigger SPL value is automatically added to end of message body. Factory default is
Measured level is.
Submit: Click Submit to send the Message changes to the system.
Message Trigger
Threshold (dB):
Enter a number in dB between 0 and 160 for the threshold. Factory default is
94.
Measurement Type:
Select SPL Fast, SPL Slow, Leq 1 sec, Leq 10 sec, Leq 1 min, Leq 5 min, Leq 10 min,
Leq 15 min, Leq 30 min, Leq 1 hr, Leq 8 hr, Leq 24 hr, Leq Continuous, User Ln,
L1, L10, L50, L90, or Peak C. Factory default is Leq 5 min.
Minimum Message Interval:
Select 1 min, 10 min, 30 min, 1 hr, 2 hr, 4 hr, or 8 hr. Factory default is
1 hr.
Submit: Click Submit to send the Message Trigger changes to the system. This
resets Minimum Message Interval timer.
Test Message: Click
Send to send a test message. Status must be enabled for test message to be sent.
Error Status: Shows
--- or current error. See
Configuration Menu Help
for a description of all error messages.
Clear Error Message:
Click to clear error message.
Sending
SMS Text Messages:
To
send an SMS text message set the recipient address using the chart below.
This is only a partial list of providers.
Contact your wireless provider for details.
|
Provider |
Access Number |
|
Alltel |
[phonenumber]@alltelmessage.com or
[phonenumber]@message.alltel.com |
|
Ameritech/SBC |
[phonenumber]@paging.sbc.com |
|
Former AT&T customers |
[phonenumber]@mmode.com |
|
CellularOne |
[phonenumber]@mobile.celloneusa.com |
|
Cingular |
[phonenumber]@cingularme.com |
|
Metrocall |
[phonenumber]@page.metrocall.com |
|
Nextel |
[phonenumber]@messaging.nextel.com |
|
Omnipoint |
[phonenumber]@omnipointpcs.com |
|
Qwest |
[phonenumber]@qwestmp.com |
|
Sprint |
[phonenumber]@messaging.sprintpcs.com |
|
T-Mobile |
[phonenumber]@tmomail.net |
|
US
Cellular |
[phonenumber]@mms.uscc.net |
|
Verizon |
[phonenumber]@vtext.com |
|
Virgin
Mobile |
[phonenumber]@vmobl.com |
|
Note: [phonenumber] equals
your 10-digit phone number (no
spaces or dashes). |
Studio Technologies,
Inc.: Clicking this link will bring you to the SPLnet website home page.
|
